Products / Seating Mechanisms
OG-540 Puma Sofa-Bed Mechanism, open position
Where it is used Corner and seating group: sofa-bed conversion (puma)

OG-540 Puma Sofa-Bed Mechanism

Puma Mekanizması

Sofa turns into a bed; the seat first slides forward, fabrics do not rub.

Used in
Corner and seating group
Movement
Slide 10 cm · bed 75 × 20 cm
Hidden compartment gap
Recommended max thickness 10 cm
Finish (standard)
Black powder coat
Ask about this product

Order code

This product has no options; one code. Just tell us the quantity.

OG-540 Puma Sofa-Bed Mechanism
Your order code
Request a quote with this code
Quote form

Installation

  1. Details

    In this position the two large holes in the front part line up with the countersunk holes of the base bracket. Place the base bracket against the side wall of the frame and fix it with wood screws through the three countersunk holes.

  2. Details

    Set the side rail of the visible seat frame on the top face of the upper bar; screw it from above (the screws pass through the rail into the hole and the two slots in the top flange of the bar).

  3. Details

    Screw it from above into the hole and the two slots in the top flange. The backrest is fixed and is not attached to the mechanism.

  4. Details

    Tighten an M6 bolt and nut through the square hole (fixed) at one end and through the slot (adjustment) at the other; the slot allows for a tube cut slightly short.

  5. Details

    The hidden seat rises and both surfaces come level. Push it back to close. Both sides must move together without catching.

Technical data

Dimensions in mm, from the CAD model. Click to enlarge.
FinishBlack powder coat
Where it is usedCorner and seating group: sofa-bed conversion (puma)
Permanent linkstanmekanizma.com/en/u/OG-540Scan the QR code with your phone or share the link.Updated:
OG-540 Puma Sofa-Bed MechanismRequest a quote