Products / Seating Mechanisms
OG-530 Ratchet Armrest Mechanism, open position
Finish
Where it is used Corner and seating group: ratchet armrest

OG-530 Ratchet Armrest Mechanism

Kademeli Kolçak Mekanizması

Twin ratchet armrest: ø16 tube set, three 15° steps.

Used in
Corner and seating group
Steps
3 steps × 15°
Set
Twin mechanism · ø16 tube · tube length to order
Finish (standard)
Black powder coat
Build your code

Build your code

1Version

OG-530 Ratchet Armrest Mechanism
Your order code
Request a quote with this code
Quote form

Available codes

CodeDescription
OG-530Ratchet Armrest Mechanism
OG-530-ZRatchet Armrest Mechanism — zinc plated

Installation

  1. Details

    In the closed position place the flanges of both lower brackets on the base of the seat box. Fix them with wood screws through the two holes in each flange (4 in total); on a metal or thick base, M8 bolts can be used through the slots instead.

  2. Details

    Fix it from below with 4 screws. The upper brackets move with the armrest.

  3. Details

    Cut a slot for the arms of each mechanism (2 slots). The arms must travel in the slots without catching; there is no intermediate plate.

  4. Details

    Pull it in and push it fully out; then lift it: it should lock at 15°, 30° and 45°, unlatch at 60° and return to 0° when lowered. The two mechanisms work together.

Technical data

Dimensions in mm, from the CAD model. Click to enlarge.
FinishBlack powder coat (standard) · zinc plated (Z)
PositionsThe armrest is slid sideways above the seat (in–out); the top part tilts in three 15° steps and releases at 60° to return
Where it is usedCorner and seating group: ratchet armrest
Permanent linkstanmekanizma.com/en/u/OG-530Scan the QR code with your phone or share the link.Updated:
OG-530 Ratchet Armrest MechanismRequest a quote